Designed for use with the Gov RegTM Inline Secondary Pressure Regulator, this Gov RegTM Gaugeless Adjuster Tool allows technicians and homebrewers to set the PSI on their regulator below 4 PSI (the lowest setting on the regular Gov RegTM Adjusting Tool gauge).To increase PSI, rotate the tool clockwise.To decrease, rotate counterclockwise.
Using the gaugeless adjuster, a user can cycle through the PSI range much quicker than with the gauge tool attached, which might help diagnose and fix a sticking issue in the regulator.You can flow test, clean, disassemble/reassemble, check seals, etc. in a fraction of the time. For example, if there is an issue with fluid back flow into the Gov RegTM because it was installed without a check valve in the coupler and boiling the Gov RegTM did not solve the problem, you could quickly disassemble it with the gaugeless tool, check the seals, give the internals a good rinse, and then screw it back together.
